Inverter not switching to battery during power cut

Sourced from the official MuscleGrid manuals · updated 2026-09-14

If the inverter does not run on battery when mains goes off:

  1. Check the battery isolator/switch is ON.
  2. Check both battery terminals are tight and not loose or corroded.
  3. Check the DC fuse between battery and inverter.
  4. If the battery is very low it may need a few hours of charging first. If it still does not switch, the inverter changeover may be faulty — book a service visit.

Related guides

⚡
Inverter fault codes→
Look up any error code by series
🔋
Battery fault codes→
JK BMS codes on the battery LCD
🛠
All troubleshooting guides→
Step-by-step fixes for common problems

Shop MuscleGrid

🛒
Lithium Batteries→
Prices, specs and full range
🛒
Solar Inverters→
Prices, specs and full range
🛒
Voltage Stabilizers→
Prices, specs and full range
Still stuck? Our support team fixes these issues every day — most by remote guidance, the rest by free doorstep pickup-repair-return under warranty.
Contact MuscleGrid Support →  ·  Register your warranty